Search results for "electrochemical characterization"
showing 10 items of 15 documents
The effect of hydration layers on the anodic growth and on the dielectric properties of Al2O3 for electrolytic capacitors
2014
Hydrous films were grown on high purity and cubicity Al foils for electrolytic capacitors in deionized water, ethylene glycol - deionized water and in glycerol - deionized water for different immersion times. According to the X-ray diffraction patterns the hydration treatment allowed to grow a pseudo boehmite layer on Al surface whose morphology is appreciably affected by the bath composition. Capacitance measurements and photoelectrochemical findings suggest that a more compact barrier layer forms during the immersion in alcohol containing solutions. The hydration in water allowed to save energy and to prepare more blocking oxide films. The beneficial effect of hydration in hot water on th…
(Photo)catalyst characterization techniques: Adsorption isotherms and BET, SEM, FTIR, UV-Vis, photoluminescence, and electrochemical characterizations
2019
This chapter reports on some characterization techniques that are commonly used for catalysts and photocatalysts. Brunauer-Emmett-Teller (BET), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), UV-visible (UV-Vis), photoluminescence (PL), and electrochemical characterization techniques are presented with experimental details and actual case studies from literature are discussed. The chapter starts with adsorption phenomena on (photo)catalysis and adsorption isotherms are presented. Then BET analysis technique and its applications in (photo)catalysis are explained. Morphological properties (SEM), functional groups, and the interaction of substrate (and inter…
Nanostructured anode material for Li-ion batteries
2010
The present paper focuses on a nanostructured SnCo alloy electrochemically prepared by template method in view of its use as anode material alternative to graphite in lithium-ion batteries. The fabrication of SnCo nanowire arrays was carried out by potentiostatic co-deposition of the two metals by using nanostructured anodic alumina membranes as template. Electrochemical tests on lithiation-delithiation of these SnCo electrodes in conventional organic electrolyte (EC:DMC LiPF6) at 30°C showed that their specific capacity was stable for about the first 12 cycles at a value near to the theoretical one for Li22Sn5 and, hence, progressively decayed.
Growth and Characterization of Anodic Films on Scandium
2013
The anodic behavior of Sc in a slightly alkaline aqueous solution is studied. Electrochemical and capacitance measurements suggest that passive films can be formed on the scandium surface under a high electric field. The formation of these layers occurs at low faradaic efficiency due to oxygen evolution. Photoelectrochemical experiments suggest the formation of a barrier layer with a thickness high enough to hinder external electron photoemission processes and allow the estimation of the bandgap of the films as a function of their formation voltage. The estimated bandgap values were lower than that reported for Sc2O3, suggesting the formation of hydrated phases and/or of a strongly oxygen d…
Anodic Electro Deposition of CeO2 and Co-Doped CeO2 Thin Films
2013
CeO2 and Co containing CeO2 thin films were deposited on indium tin oxide and stainless steel by anodic electrodeposition. Scanning electron microscopy showed that the films are flat and show globular morphology and cracks resulting from volume shrinking. According to XRD and Raman Spectroscopy pure ceria layers are crystalline, while the presence of Co induces the formation of amorphous films. The good adhesion and the compactness allowed the photoelectrochemical characterization of the films. A band gap value of 2.9 eV was estimated for CeO2, while slightly higher values (̃3.0 eV) were estimated for Co containing films. A mechanism for ceria anodic electrodeposition is proposed and discus…
Photoelectrochemical characterization of amorphous anodic films on Ti-6at.%Si
2013
Abstract The solid state properties of anodic films grown galvanostatically on sputtering-deposited Ti–6at.%Si alloys were studied as a function of the formation voltage (5–40 V). From the photocurrent spectra a band gap of ∼3.4 eV was estimated for all the investigated thicknesses, which is almost coincident with the value measured for amorphous TiO 2 . The photocharacteristics allowed to estimate the flat band potential of the films, which resulted to be more anodic for thicker layers and allowed to evidence a change from n-type semiconducting material to insulator by increasing the formation voltage. A dielectric constant of ∼31 was estimated by differential capacitance measurements. The…
Photoelectrochemical evidence of Nitrogen Incorporation during Anodizing of Sputtering-Deposited Al-Ta alloys
2016
Anodic films were grown to 20 V on sputtering-deposited Al–Ta alloys in ammonium biborate and borate buffer solutions. According to glow discharge optical emission spectroscopy, anodizing in ammonium containing solution leads to the formation of N containing anodic layers. Impedance measurements did not evidence significant differences between the dielectric properties of the anodic films as a function of the anodizing electrolyte. Photoelectrochemical investigation allowed evidencing that N incorporation induces a red-shift in the light absorption threshold of the films due to the formation of allowed localized states inside their mobility gap. The estimated Fowler threshold for the intern…
Photoelectrochemical evidence of Nitrogen Incorporation during Anodizing of valve metals alloys
2015
Amorphous and/or nanocrystalline oxide films can be easily prepared electrochemically by anodizing. The anodizing allows to grow oxides with structural and compositional features easily and strictly controlled by the process parameters.
Polymeric C3N4 and O-doped C3N4: Photoelectrochemical and EPR Features for Selective Photocatalytic Oxidation of Alcohols to Aldehydes
2018
Polymeric C3N4 and O-doped C3N4: Photoelectrochemical and EPR Features for Selective Photocatalytic Oxidation of Alcohols to Aldehydes
Electrochemical characterization of mangrove sediments: A proposal of new proxies for organic matter oxidation
2019
Abstract The voltammetric response of microparticulate deposits resulting from solvent evaporation of ethanolic extracts of mangrove sediments in contact with aqueous acetate buffer is hereby described. Dated sediment cores sampled from the Peruvian mangrove system (“Manglares de Tumbes” National Sanctuary) presented voltammetric responses dominated by oxidative signals of organic components that exhibit significant variations depending on the depth. Voltammetric data allowed for the definition of electrochemical indexes representative of the electrochemically oxidable organic matter fraction. These electrochemical indexes were fEAOM (for the total amount of organic matter being electrochem…